Orbis anti-ligature - lever sets.

Horn-shaped-lever-set

Horn shaped lever set.



  • Aesthetically pleasing lever set that is suitable for a wide range of applications
  • Developed with a major NHS Mental Health Trust using rapid prototyping to ensure that it would be operable by less physically able people
  • The curved, downward sloping 45º horn shape prevents a ligature being attached
  • Supplied complete with spindle and back-to-back fixings
  • No visible fixings on client side of the door; tamper-proof fixings on staff side

Please note, the image illustrates a RH set with the visible grub screw on the RH lever (Staff side).

Horn shaped lever set.



  • Aesthetically pleasing lever set that is suitable for a wide range of applications
  • Developed with a major NHS Mental Health Trust using rapid prototyping to ensure that it would be operable by less physically able people
  • The curved, downward sloping 45º horn shape prevents a ligature being attached
  • Supplied complete with spindle and back-to-back fixings
  • No visible fixings on client side of the door; tamper-proof fixings on staff side

Please note, the image illustrates a RH set with the visible grub screw on the RH lever (Staff side).

Horn-shaped-lever-set

Handing
Please be aware that these lever handles are handed and must be ordered according to the handing protocol shown below.

Horn shaped lever

LEFT HAND LEVER SETS Finishes  
Item no. Description SS7 SA7 Unit
54.AL8.H.L.2 To suit doors 44mm   pair
54.AL8.H.L.3 To suit doors 54mm   pair
54.AL8.H.L.4 To suit doors 62mm   pair
RIGHT HAND LEVER SETS Finishes  
Item no. Description SS7 SA7 Unit
54.AL8.H.R.2 To suit doors 44mm   pair
54.AL8.H.R.3 To suit doors 54mm   pair
54.AL8.H.R.4 To suit doors 62mm   pair

Angled lever set.



  • Levers are tapered from the door and set at 45º angle to eliminate their use as a ligature point, whilst providing sufficient turning to open the door
  • Used preferably with a lock case were the lock is above the lever, if a lock is also required
  • Supplied complete with spindle and back-to-back fixings
  • Half lever sets also available, supplied with bolt through fixings and half spindle
  • No visible fixings on client side of the door; tamper-proof fixings on staff side

Please note, the image illustrates a RH set with the visible fixings on the RH lever rose.

Angled-lever-set

Product Handing
Please be aware that these lever handles are handed and must be ordered according to the handing protocol shown below.

Angled lever set

LEFT HAND LEVER SETS Finishes  
Item no. Description SS7 SA7 Unit
54.AL8.30.L.2 To suit doors 44mm •  pair
54.AL8.30.L.3 To suit doors 54mm •  pair
54.AL8.30.L.4 To suit doors 62mm •  pair
RIGHT HAND LEVER SETS Finishes  
Item no. Description SS7 SA7 Unit
54.AL8.30.R.2 To suit doors 44mm •  pair
54.AL8.30.R.3 To suit doors 54mm •  pair
54.AL8.30.R.4 To suit doors 62mm •  pair
HALF LEVER SETS Finishes  
Item no. Description SS7 SA7 Unit
54.AL8.30L/H To suit doors 44mm •  pair
54.AL8.30R/H To suit doors 54mm •  pair

Please note, half lever sets are supplied complete with a blind rose on the opposite side. Fixings are visible on the external lever rose.

Specification advice: If used in conjunction with a sashlock, it is advisable to use a lock case with the cylinder above the lever.
A lightly sprung lock case is not required with this lever set.

Contact us to see how we can help you now

Call on 01902 600400 or contact us below
 
 
Top