Orbis anti-ligature hinges, pivot sets & emergency stops.

Double-action-pivot-set

Double action pivot set.



Designed specifically to allow double action, these pivots are ideally used in conjunction with the Retractable Door Stop for use in protected environments.

 

  • Wall or Frame mounted option suitable for doors up to 80kgs
  • Floor mounted option for doors up to 120kgs
  • Stainless steel construction
  • Phosphor bronze thrust bearing is low maintenance and highly durable
  • Radiused version available

Double action pivot set.



Designed specifically to allow double action, these pivots are ideally used in conjunction with the Retractable Door Stop for use in protected environments.

 

  • Wall or Frame mounted option suitable for doors up to 80kgs
  • Floor mounted option for doors up to 120kgs
  • Stainless steel construction
  • Phosphor bronze thrust bearing is low maintenance and highly durable
  • Radiused version available

Double-action-pivot-set

Double action pivot set table

    Finishes  
Item no. Description SS7 SA7 Unit
37 568 Square profile   single
37 569 Radiused profile   single

Specification advice: Tamper-proof fixings are not provided as standard. If required, please request when ordering

Emergency release door stop.



  • Used in conjunction with a pivot set
  • Release device can be depressed to allow door that normally opens inwards to open outwards and allow access to room
  • Secure “Pin-Lok” release
  • Available in stainless steel only

Emergency-release-door-stop

Emergency release door stop table

    Finishes  
Item no. Description SS7 SA7 Unit
37 567 Emergency release door stop   single

Hinges

Chamfered-hinge

Hinges.



Chamfered hinge

 

  • CE Marked
  • To BS EN 1935 Grade 14
  • Concealed bearing hinge
  • Triple-knuckle butt hinge
  • Chamfered knuckle prevents hinge being used as ligature point
  • Available as Square or Radiused profile
  • Grade 304 stainless steel, available as satin or bright polished fin
  • Minimum door thickness 44mm
  • Maximum door weight 37.AL4.1 - 160kg 37.AL5.1 - 160kg
  • Safety Grade 4 to DHF TS 001
  • With intumescent strip in place, hinge is suitable for use on 30 and 60 minute fire doors
  • Certifire approved – CF351
  • Anti tamper Torx screws provided
  • Maintenance free with a 32 year guarantee

Hinges.



Chamfered hinge

 

  • CE Marked
  • To BS EN 1935 Grade 14
  • Concealed bearing hinge
  • Triple-knuckle butt hinge
  • Chamfered knuckle prevents hinge being used as ligature point
  • Available as Square or Radiused profile
  • Grade 304 stainless steel, available as satin or bright polished fin
  • Minimum door thickness 44mm
  • Maximum door weight 37.AL4.1 - 160kg 37.AL5.1 - 160kg
  • Safety Grade 4 to DHF TS 001
  • With intumescent strip in place, hinge is suitable for use on 30 and 60 minute fire doors
  • Certifire approved – CF351
  • Anti tamper Torx screws provided
  • Maintenance free with a 32 year guarantee

Hinges

Chamfered-hinge

Chamfered hinge table

    Finishes  
Item no. Description SS7 SA7 Unit
37.AL4.1 Square profile   single
37.AL5.1 Radius profile   single

Hinges.



Continuous hinge

A continuous, full length hinge with anti-ligature tip is ideal for use in healthcare, psychiatric and secure accommodation. 

  • Full height up to 2100mm
  • Can be cut on-site to suit door height
  • Single action is suitable for doors up to 125kg
  • Double action is suitable for doors up to 176kg
  • Continuous gearing
  • Aluminium finish
  • Min. door thickness 44mm
  • Fire tested to BS 476 pt.22 for 60 minute rating
  • Version suitable for use with Perko Powermatic door closer

     

     

Continuous-hinge

Continuous hinge table

    Finishes  
Item no. Description SS7 SA7 Unit
37 580.H Continuous hinge
single
37 580.HC With cut-out for closer
single
    Finishes  
Item no. Description SS7 SA7 Unit
37 583 Continuous hinge
single

Door-Stops-_-Emergency-Release

Door stops & emergency release.



A continuous, retractable door stop allows staff to release the stop to convert a normally inward opening door to open outwards in the event of an emergency. It must be used in conjunction with pivots or double action hinge.

  • Full height up to 2100mm
  • Can be cut on-site to suit door height
  • Stop is locked using a concealed hook bolt
  • Aluminium finish with optional solid sapele timber stop
  • Aluminium finish with optional primed mdf stop
  • Min. door thickness 44mm
  • Option with extended spindle which allows unlocking through the architrave
  • Fire tested to BS 476 pt.22 for 30 and 60 minute rating
  • Handed LH and RH


Door stops & emergency release.



A continuous, retractable door stop allows staff to release the stop to convert a normally inward opening door to open outwards in the event of an emergency. It must be used in conjunction with pivots or double action hinge.

  • Full height up to 2100mm
  • Can be cut on-site to suit door height
  • Stop is locked using a concealed hook bolt
  • Aluminium finish with optional solid sapele timber stop
  • Aluminium finish with optional primed mdf stop
  • Min. door thickness 44mm
  • Option with extended spindle which allows unlocking through the architrave
  • Fire tested to BS 476 pt.22 for 30 and 60 minute rating
  • Handed LH and RH


Door-Stops-_-Emergency-Release

Retractable door stop table

Item no. Description
37 581.L Mech. only - standard spindle - LH
37 581.R Mech. only - standard spindle - RH
37 582.L Mech. c/w sapele stop - stnd. spindle - LH
37 582.R Mech. c/w sapele stop - stnd. spindle - RH
37 584.L Mech. c/w mdf stop - extended. spindle - LH
37 584.R Mech. c/w mdf stop - extended. spindle - RH
37 585.L Mech. only - extended spindle -LH
37 585.R Mech. only - extended spindle -RH
37 586.L Mech. with SAA stop for steel doors - LH
37 586.R Mech. with SAA stop for steel doors - RH

Contact us to see how we can help you now

Call on 01902 600400 or contact us below
 
 
Top